The GiraffeG4 Truck Protection System is revolutionary safety device that allows truck drivers to accurately and reliably measure the height of overhead obstacles from inside their cab. Using state of the art sound wave technology, the GiraffeG4 can measure the height of most overhead obstacles, giving the driver complete control and the opportunity to avoid damage to their truck and their freight. The GiraffeG4 can be installed and programmed in minutes and will provide years of dedicated service.
Using the GiraffeG4 Truck Protection System couldn’t be easier. The driver pre-programs the height of the trailer he is pulling into the read-out. When faced with an obstacle that may be too low for his rig (i.e. bridge, trestle) the driver pulls the cab under the hazard. The mirror mounted GiraffeG4 sends a signal at the speed of sound (3bps) and the read-out in the cab displays the hazards height. If the bridge is too low the read-out will beep and flash. If there is clearance, the driver proceeds and the sensor continues to measure the height of the hazard as the truck passes under the hazard.
The GiraffeG4 Truck Protection System is made up of two high-performance components that are sold together. The In Cab-Driver Programmable Read-out is easy to mount and has a bright LED display. The Sealed Sensor Unit attaches simply and securely to the exterior mirror bracket. This unit is aerodynamic and waterproof, and connects to the In Cab-Driver Programmable Read-out with the included 8 feet of coaxial cable.
At less than $190.00, the GiraffeG4 Truck Protection System is an inexpensive and effective way to keep insurance and freight damage costs down, and a handy tool for drivers to use to protect their license and their job.
For more information about the GiraffeG4 Truck Protection System or to make a purchase, visit www.giraffeg4.com or call 1-877-543-1087.